Friends EVO
Posted: Tue Jul 07, 2009 12:15 amMOD LIST
Engine
JMS Racing Built 2.0
Kelford 272/280 IX cams
Buschur Balance shaft removal kit
Buschur oil cooler delete kit
STM Forward Facing Manifold/ PTE Billet 6262 .82a/r
Driven Innovations Intake manifold
Milspec 65mm TB
Buschur RACE FMIC
Noribilt Fabrications 2.5 inch IC piping
Buschur Coil on plug ignition system
AEM ems
Tial 50mm BOV
AMS Mini radiator kit
Fuel
Buschur fuel rail
Buschur Double pumper
1600cc PTE injectors
STM fuel return line kit
Fuel lab FPR
AMS Fuel Feed line
30psi = E85, 40+ = Q16
Drivetrain
Bushwacker Stage 1 tranny with Evo VIII 4th gear
Quartermaster Twin disc setup
Buschur moustache bar
Buschur Side diff mounts
AWD Motorsports 2-piece Aluminum driveshaft
Suspension/Rollers/Brakes
AWD Spec D2 Coilovers
AMS Wilwood front brake kit
5Zign FNO1C-R 15 X 7 +42 rims
Hoosier QTP 26 x 9.5 x 15
http://s126.photobucket.com/albums/p100 ... I_1884.flv
Finally broke in the 10's dammit. Pass was a 10.6 @ 138mph. The car completely blew through the slicks in 1st gear lol. The front slicks were smoking from what I saw on the video recorded. I bogged the 1-2 shift dropping out of boost and killing momentum as well.
Pass was done on E85 and after looking at the logs, it held 28-29psi most of the run...touched 30psi for a millisecond in 4th gear. I'm positive the car can run 9's as it sits at 140+mph on a clean pass. Temperature at the track was pretty high and humid.
I really wanted another pass but they're really cracking down on the cage thing at SAR...I have no choice now but to put some bars in the car..I simply enjoy the track too much not too. Now that those pesky 10's are out of the way...time for some single digits before I up the boost or run race gas.
just want to share some good stuff
Engine
JMS Racing Built 2.0
Kelford 272/280 IX cams
Buschur Balance shaft removal kit
Buschur oil cooler delete kit
STM Forward Facing Manifold/ PTE Billet 6262 .82a/r
Driven Innovations Intake manifold
Milspec 65mm TB
Buschur RACE FMIC
Noribilt Fabrications 2.5 inch IC piping
Buschur Coil on plug ignition system
AEM ems
Tial 50mm BOV
AMS Mini radiator kit
Fuel
Buschur fuel rail
Buschur Double pumper
1600cc PTE injectors
STM fuel return line kit
Fuel lab FPR
AMS Fuel Feed line
30psi = E85, 40+ = Q16
Drivetrain
Bushwacker Stage 1 tranny with Evo VIII 4th gear
Quartermaster Twin disc setup
Buschur moustache bar
Buschur Side diff mounts
AWD Motorsports 2-piece Aluminum driveshaft
Suspension/Rollers/Brakes
AWD Spec D2 Coilovers
AMS Wilwood front brake kit
5Zign FNO1C-R 15 X 7 +42 rims
Hoosier QTP 26 x 9.5 x 15
http://s126.photobucket.com/albums/p100 ... I_1884.flv
Finally broke in the 10's dammit. Pass was a 10.6 @ 138mph. The car completely blew through the slicks in 1st gear lol. The front slicks were smoking from what I saw on the video recorded. I bogged the 1-2 shift dropping out of boost and killing momentum as well.
Pass was done on E85 and after looking at the logs, it held 28-29psi most of the run...touched 30psi for a millisecond in 4th gear. I'm positive the car can run 9's as it sits at 140+mph on a clean pass. Temperature at the track was pretty high and humid.
I really wanted another pass but they're really cracking down on the cage thing at SAR...I have no choice now but to put some bars in the car..I simply enjoy the track too much not too. Now that those pesky 10's are out of the way...time for some single digits before I up the boost or run race gas.
just want to share some good stuff
